red lion - Fanuc LR R30ia

fannar

Member
F
Join Date
Oct 2017
Location
iceland
Posts
13
Hey guys

First thing is it possible to have 3 buttons in red lion hmi display to start 3 different fanuc programs ?

I have tried connecting Crossover cable between the hmi and fanuc trying to send registers to the fanuc but without luck.

If anyone knows how to and could point me in the direction i would be happy!

Regards
fannar
 

Similar Topics

Brijm
Red Lion and Fanuc Robot
I recently went through a training course for Fanuc Robots. That got me thinking... Has anyone used a G3 Red Lion HMI to talk between a Fanuc and...
Replies
0
Views
3,745
Brijm
Brijm
B
Red Lion G3 Hmi And Gefanuc 9030 Problems
Greetings. I'm using a new Red Lion G308 HMI with an existing GEFANUC 9030 PLC with a 364 CPU with built in Ethernet. I can communicate with...
Replies
2
Views
6,360
MikeGranby
MikeGranby
A
PSA: Red Lion datalog, alarm and event date/time errors
From the Red Lion website, after some customer enquiries in the last week or so... Rev. March 25, 2024 [18:30] Just thought it might help a...
Replies
9
Views
247
DwSoFt
D
K
Red Lion BMS Crimson 3.1 update
How do you install update on Red Lion Crimson ver 3.1. Do I just need to run the exe file on the host server?
Replies
1
Views
94
BryanG
B
T
Red Lion CR3000, Remote reboot possible?
Hello All, I need the ability to remotely reboot a Red Lion CR3000 HMI. Due to some graphics issues when the database is updated the HMI must be...
Replies
4
Views
198
TopperAce
T
Back
Top Bottom