I have created an ALARM LIST in the Panelview in Panelbuider 32.
I have assigned N7:2/0 to N7:2/4 for five alarms. Whenever N7:2/1 or N7:2/2 activates,the corresponding address is activated in PLC, but in Panel view, I always get N7:2/0 as activated in the ALARM BANNER and in the alarm list. I checked the TAG Editor, ALARM setup screen and the PLC address and they are matching corretly. But, i dont know why Im getting mismatching of alarms in Alarm Banner.
Could anybody help in answering the above problem.
I have assigned N7:2/0 to N7:2/4 for five alarms. Whenever N7:2/1 or N7:2/2 activates,the corresponding address is activated in PLC, but in Panel view, I always get N7:2/0 as activated in the ALARM BANNER and in the alarm list. I checked the TAG Editor, ALARM setup screen and the PLC address and they are matching corretly. But, i dont know why Im getting mismatching of alarms in Alarm Banner.
Could anybody help in answering the above problem.