Red Lion Logger

Rube

Member
Join Date
Sep 2003
Location
Fort Worth, Texas
Posts
957
What is the minimum time required to trigger a snapshot to the Logger in a G315? Does anyone have experience with sporadic log event misses due to trigger timing errors?
 

Similar Topics

This one is probably fairly simple, but I wanted to make sure I was understanding it right since I am very new to this. In the setup options I...
Replies
15
Views
6,175
Hello everyone, I have a water treatment skid that uses an Allen Bradley Micrologix 1500 PLC and the Red Lion data logger model CSMSTRSX. I had...
Replies
0
Views
5,845
I'm trying to use a Red Lion Cub counter (Cub5B00) as a counter and give the cub's counts to a Graphite G12 PLC/HMI to display. After about an...
Replies
1
Views
61
Hi everybody, I have about three Red Lion HMI's, the calibration on the screens seems correct but where I'm using the pop up keypad to enter...
Replies
1
Views
82
Hi folks, I'm trying to parse a binary string on a Red Lion DA30D using a Raw UDP/IP input port. I've done this before with ASCII strings so I do...
Replies
35
Views
745
Back
Top Bottom