Hi all,
I have winncc flex 2008 project that I am working on. I have a MP377 panel connected via ethernet to a S7-300 which is working fine. I am trying to connect pc with runtime to the same plc. The problem is I cannot get runtime to run on the pc. I can transfer the project okay but in runtime the pc will not communicate with the plc. I have tried 3 different pc all with the same result. However, I have a laptop that connects and works, but the pc's will not. Some errors I get on the pc are:
140004 - Incorrect access point
140001 - Connection disconnected
170003 - error code 0x80000104
Any ideas on what is going on here. It is strange that the same project will work on my laptop but will not work on a pc. Any help or suggections are greatly appricitated.
Thanks,
mrt19
I have winncc flex 2008 project that I am working on. I have a MP377 panel connected via ethernet to a S7-300 which is working fine. I am trying to connect pc with runtime to the same plc. The problem is I cannot get runtime to run on the pc. I can transfer the project okay but in runtime the pc will not communicate with the plc. I have tried 3 different pc all with the same result. However, I have a laptop that connects and works, but the pc's will not. Some errors I get on the pc are:
140004 - Incorrect access point
140001 - Connection disconnected
170003 - error code 0x80000104
Any ideas on what is going on here. It is strange that the same project will work on my laptop but will not work on a pc. Any help or suggections are greatly appricitated.
Thanks,
mrt19