BCD conversion error

Annie

Member
Join Date
Sep 2005
Location
madras
Posts
22
Hi,
I recently added a BCD to int conversion block to compare 2 MW.
The CPU has a SF error.In the diagnostic area it shows BCD conversion error.
I deleted the conversion block but still the error has not gone.
THere r other BCD conversion block also in the program.But didnt face this problem before.THe data is written from a DW which is word type.
Is there any way to know which block is having problem.
the cpu i am using is CPU 315-2dp.

Regards
Annie
 

Similar Topics

Hello to all, Yesterday the production line stoped and since then we have SF light on the PLC (S7 315-2DP). Here is the screen shoot of the...
Replies
10
Views
6,491
Hi. I’m doing a PV 1400e to PVP 7 migration and I don’t know how to convert the old 8digit BCD type from PB1400e into something that will work on...
Replies
2
Views
569
Hi there. I have a Micrologix 1100, I have 6 switches to I:0/0 through I:0/5. My plan is to use I:0/0 to I:0/3 as set for a value of 0-15. I:0/4...
Replies
3
Views
1,657
Hi all, I am quite new to PLC programming, so pardon my noob-ness. First, I have counters & timers in my program that I use to calculate total...
Replies
2
Views
3,506
Hello! I am working on a project and have a question. I need to take a 16 bit word and convert it into bianary 1's and 0's. I will be pulling...
Replies
15
Views
5,416
Back
Top Bottom