S5 6ES5941-7UA12 PLC with HMI(PC based or others)

Engrtalha

Member
Join Date
May 2016
Location
Pakistan
Posts
18
Dear Members,

I am new to S5 series PLC, In one of my application, I need to communicate S5 6ES5942-7UA12/ or S5 6ES5941-7UA12 PLC with HMI(PC based or others), Please suggest Hardware and Software for visualization (PC based or HMI) and essentials to build a connection.



Best Regards
 
Please suggest Hardware and Software for visualization (PC based or HMI) and essentials to build a connection.

I dont know about your HMI but for the PLC you will need a TTY cable and Step5 software, there are aftermarket versions that I like better then the Siemens (S5 for Windows) https://www.ibhsoftec.com/S57W-Eng

I would also suggest this is a great time to upgrade your system because they stopped making them about 20 years ago
 
Hi,
Thank you for your support.HMI would be PC based WinCC flexible RT. Originally the system was running on PLC station only but now the client asks to add HMI for visualization.
 
The converter I suggested can be used for programming with IBH-S5W, and it supports S7-protocols as Put/Get, which is much more common on modern HMI systems than the cheaper cable and AS511 protocol.

Kalle
 

Similar Topics

Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
20
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
3
Views
81
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
45
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
86
Back
Top Bottom