Since we've upgraded to Factorytalk Studio v9.0, the font in our alarm history pages, and current alarm pages is huge once we do a download. I checked the setup and we have the correct panelview chosen(panelview plus 400/600), and I've went into the properties of the alarm screens and have the font at 5. The font was sized correctly before updating our software, anyone dealt with this yet?
AB Factorytalk View Studio v9.0 Alarm Font Sizing
- Thread starter d_lozy
- Start date
keshik
Lifetime Supporting Member
May not be relevant, but check your Windows display settings. If it's set to 125% instead of 100% weird things can happen.
BlueAltezza
Member
I posted about the same stuff:
http://www.plctalk.net/qanda/showthread.php?t=109076
Not many answers out there! Even after re-creating the alarm windows, once in a while after downloading the fonts would blow up, not be bold, etc.
I ended up going back to version 8, no problems there.
http://www.plctalk.net/qanda/showthread.php?t=109076
Not many answers out there! Even after re-creating the alarm windows, once in a while after downloading the fonts would blow up, not be bold, etc.
I ended up going back to version 8, no problems there.
Similar Topics
Hello,
I made a change in alarm setup in factory view studio, where I changed a alarm message text. After that I made a run application and...
Hi all, I'm having an issue with connecting View Studio emulation to a real PLC.
I am running View Studio 8.01 on a Hyper-V virtual machine...
Hello. I have a Project I'm doing in Factorytalk View Studio. One of my displays I created has a bunch of red x's on all of the objects I created...
So, I'm new to the PLC world (fresh graduate) and at my job I've been pretty much only helping out the other programmers with simpler tasks while...
Good morning,
I have a project coming up that will require my HMI runtime to toggle from English to Spanish via selector switch. What is the...