Messaging to Powerflex 4 VIA 22-COMM-E RS485

spaceacealpha

Member
spaceacealpha
Join Date
Sep 2009
Location
Tennessee
Posts
79
Hello, I have a Powerflex 40 with a 22-COMM-E module and its connected to 3 Powerflex 4 over RS485. Its address is 192.168.1.25. Is it possible to address the communication path to one of the Powerflex 4 modules? I'm attempting to GetAttributeSingle. Thanks, Darren
 

Similar Topics

C
Messaging to Powerflex 4m over Ethernet
Hello guys its me again, I have finally found time to finally get back to messing around with my "test bench" and I want to use messaging to...
Replies
9
Views
5,132
Geospark
Geospark
T
powerflex 525 with micro 1400 messaging
i want to add a powerflex 525 class to a micrologix 1400 and beable to control the frequency of the vfd from my panelview plus 600... a little...
Replies
6
Views
15,748
jrsnydley
J
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
3
Views
67
BobB
BobB
krakenfan69
PLC Messaging Itself?
Hey guys. Got a strange one. Was sent to a site where the VNC access is very poor. The IT has assisted and a Wireshark report shows data...
Replies
7
Views
319
Contr_Conn
Contr_Conn
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
96
robertmee
R
Back
Top Bottom