Good Afternoon
I have a DL205 with and attached dv-1000 I am trying to mimic with a second setup. I am admittinly inept at working with AD plc's, though I am versed enough in PLC knowledge to work with them. The issue I am having is that for some reason when I try to enter a third zone next to the v2302 slot, it does not take. (See attached photo). The names in the range v2300 and v2301 show on the dv-1000 screen, but v2302, just shows v2302. For some reason the text wont stick..
Thanks in advance for any help you can give
Kenny
I have a DL205 with and attached dv-1000 I am trying to mimic with a second setup. I am admittinly inept at working with AD plc's, though I am versed enough in PLC knowledge to work with them. The issue I am having is that for some reason when I try to enter a third zone next to the v2302 slot, it does not take. (See attached photo). The names in the range v2300 and v2301 show on the dv-1000 screen, but v2302, just shows v2302. For some reason the text wont stick..
Thanks in advance for any help you can give
Kenny