krakenfan69
Lifetime Supporting Member
I have a Red Lion DSPSX set up to read native L5K tags over Ethernet to populate tags in the DSP. I then send these tags out over RS-485 to Modbus Addresses. It was working fine but timed out and quit pushing the values (tank level %) so I changed the update policy from automatic to continuous and it seemed to keep pushing the value. Well 5 days later and it has quit pushing the values into the modbus addresses again. Any idea what might be causing the data to quit sending? I'm new to Red Lion so I would really appreciate any help you can give me.
Thanks,
Kraken Fan #69
Thanks,
Kraken Fan #69