connection profibus Parker 590 drive to Siemens 1200

amir1346

Member
Join Date
Jun 2018
Location
asas
Posts
1
Hello, I'm trying to configure Profibus communications between a CPU1214c by module cm1243-5 and a Parker 590 DC drive. in tia poral software, hex parameter assignment ralated to drive is unchangeable. but it was changeable in step 7 v5.5.what is wrong?
 

Similar Topics

Hello Experts, I have two system one ET200S and another CPU 1513- PN which are 300 meters apart. Now i want to share data between these to...
Replies
8
Views
2,415
Hi there, I'm having major issues in connecting a Siemens S7-300 315 with an ET200S through Profibus. I've tried many methods but I'm really...
Replies
11
Views
2,761
Hi, anyone got any experience with TMEIC drives? I need to establish connection with TMEIC drive over Profibus, actually to develop a FB for that...
Replies
3
Views
2,427
I have just installed WinCC V13, and I have setup my proxy and dragged my profibus connection from my proxy PLC to my HMI. There is no PN...
Replies
7
Views
5,939
Hi, I have two festo cpx terminals with modules fb-13 and I want to make profibus communication between them. One of them will be master, second...
Replies
0
Views
1,840
Back
Top Bottom