RSLogix5000: Open Sockets: Create Socket Issue

Hello,
I'm having an issue with creating a socket using a message instruction. I've attempted to copy the data structures from sample programs found in Rockwell technotes 32962 and 33672. I'm hoping you could catch my flaw in the description and pictures below. Please don't hesitate to ask if there is additional information I can supply to you.

=== Hardware
PLC: 1756-L61, Rev. 20.11
Card in use: 1756-EN2T ("Ethernet"), Rev. 5.8
Slot: 1

=== MSG Instruction
Path: 1,1 (displays as "Ethernet")
Error: 16#0001
Extended Error: 16#0009_0315

=== Image Link
http://imgur.com/a/ukLRr

You probably need to post your program or use TN 32962 without any changes

This error is an indication that you are writing illegal path string directly to the MSG.PATH bypassing the GUI and this string syntax is not correct.

Contr_Conn said:

This error is an indication that you are writing illegal path string directly to the MSG.PATH bypassing the GUI and this string syntax is not correct.

Click to expand...

Found it. Spot on, thanks.