Ti 545 - PLCS.net

larrylolson · June 25th, 2003, 04:47 PM

SET UP A TI545-TISOFT-IBM COMPATABLE-S232-WIN 98 PROGRAMABLE INTERFACE
ABOUT 10 YEARS AGO. SOMEONE STOLE THE PC. CAN ANYONE TEL ME THE DIFFERENT SETTINGS I HAVE TO SET TO MAKE THE PC TALK TO THE PLC?
TISOFT 4.2

dchartier · June 26th, 2003, 08:01 AM

Hello Larry;
I have worked with Tisoft from version 6, so there might be differences from version 4. But basically all you need to do is set the dipswitches on the PLC for the programming port speed; the sofware will adapt the Com port speed to connect through a null-modem cable.
You can get the system manual (and more) for the TI545/555 at:

http://www4.ad.siemens.de/csinfo/liv...d=cs&aktprim=0

Hope this helps,
Daniel Chartier

June 25th, 2003, 04:47 PM	#1
larrylolson Member Join Date: Jun 2003 Location: Washington State Posts: 1	Ti 545 SET UP A TI545-TISOFT-IBM COMPATABLE-S232-WIN 98 PROGRAMABLE INTERFACE ABOUT 10 YEARS AGO. SOMEONE STOLE THE PC. CAN ANYONE TEL ME THE DIFFERENT SETTINGS I HAVE TO SET TO MAKE THE PC TALK TO THE PLC? TISOFT 4.2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
What is require for programming a TI 510-1101 PLC?	wilvil2000	LIVE PLC Questions And Answers	4	June 22nd, 2005 06:51 AM
Ti 545 to a Marquee	ilikbeer	LIVE PLC Questions And Answers	11	March 15th, 2005 04:59 AM
TI 550 Program Reading Advice	BPaquette	LIVE PLC Questions And Answers	2	May 26th, 2004 08:22 AM
Siemens 545 PLC	Matthias Von Zorn	LIVE PLC Questions And Answers	11	April 22nd, 2004 12:44 AM
Information TI Soft 405, TI Sof 425, TI Soft 245	Aafke	LIVE PLC Questions And Answers	1	October 9th, 2003 08:20 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.* ---------->>>>>Get FREE PLC Programming Tips

June 26th, 2003, 08:01 AM	#2
dchartier Member Join Date: May 2003 Posts: 1,407	Hello Larry; I have worked with Tisoft from version 6, so there might be differences from version 4. But basically all you need to do is set the dipswitches on the PLC for the programming port speed; the sofware will adapt the Com port speed to connect through a null-modem cable. You can get the system manual (and more) for the TI545/555 at: http://www4.ad.siemens.de/csinfo/liv...d=cs&aktprim=0 Hope this helps, Daniel Chartier

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)