OT - Perpetual Motion HVAC?

If you live in an area with constant, reliable winds, a couple of large windows with a "funnel" collecting the wind and forcing it through the building could, in some strange way, be considered perpetual motion.
 
Is there some reference here that I'm missing? A quick googling didn't bring up anything.
 
IF you lived near water and could harness the power of waves? Then figure out a way to turn that power into a way that could circulate cooler air from the place you are generating the power?

Just my $0.02 lol
 
Ahh, much funnier with context. I suspected as such but wasn't sure.

But maybe they were trying to establish a gradient of cool to warm between the two units.
 
Sorry for not explaining what is depicted. It's what is commonly called a "mini-split", or "ductless" heat pump. Most can heat and cool, but the outdoor unit, which acts as a condenser for cooling or evaporator for heating, has to be outside.

It actually would work as a decent humidifier!
 

Similar Topics

R
SoMachine Motion Service 4.3
Hello Everybody Anybody knows where I can get this version of SoMachine? The new machine expert version won't open my project saying there is a...
Replies
0
Views
34
RodrigoPLC
R
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
82
mk42
M
C
Módulo Motion FX5-40SSC-S
Bom dia, Estou com uma máquina parada algum tempo, meu servo funciona em modo manual, porém não funciona em automático. Meu equipamento e...
Replies
0
Views
60
CapaceteJR
C
A
Different Drivers and motors motion sync in Rockwell Studio 5000
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
Replies
1
Views
216
robertmee
R
H
Motion control use torque loop in Rockwell Studio 5000
I have always controlled servos in Rockwell motion using position loop. I have an application where one process will push against a servo...
Replies
3
Views
270
robertmee
R
Back
Top Bottom