smelo Member S Join Date Jan 2017 Location Concepcion Posts 1 Mar 25, 2017 #1 Hi, i cant turn on the output coil in a ladder program http://prntscr.com/eofrvi does anyone know what im doing wrong?
Hi, i cant turn on the output coil in a ladder program http://prntscr.com/eofrvi does anyone know what im doing wrong?
goghie Lifetime Supporting Member G Join Date Jan 2008 Location Belgrade Posts 800 Mar 25, 2017 #2 Contacts "rele_term", "parada" and "manual_p" are ON, and as they are NC contacts - you don't have power flow to the "salida_motor1" output.
Contacts "rele_term", "parada" and "manual_p" are ON, and as they are NC contacts - you don't have power flow to the "salida_motor1" output.
PeterW Member P Join Date Jun 2006 Location Calgary, AB Posts 2,531 Mar 25, 2017 #3 goghie said: Contacts "rele_term", "parada" and "manual_p" are ON, and as they are NC contacts - you don't have power flow to the "salida_motor1" output. Click to expand... Actually those three are off and you can see the power flow through them. The last N/C is on though, entrada_automatica, this is breaking the circuit.
goghie said: Contacts "rele_term", "parada" and "manual_p" are ON, and as they are NC contacts - you don't have power flow to the "salida_motor1" output. Click to expand... Actually those three are off and you can see the power flow through them. The last N/C is on though, entrada_automatica, this is breaking the circuit.