NAVEEN KUMAR GUPTA
Member
Sir i can not upload program from hmi to pc please help me
Mitshubishi HMI Model no.- GS2107-WTBD
I Have Software- GT Designer3 GOT 2000
PLC- FX3G- 24M MELSEC
In hmi there are two ports RS232 Male & RS 422 Female
I connect that HMI via RS232
I have one female to Female connecting cable & male to USB cable.
Sir according to me the possibility of error female to female connector pin configuration or it can be cable problem i am not sure.
So if it is wrong then tell me about pin configuration of female to female connector.
when i configure the connection error arises that time error code is 01808502
Mitshubishi HMI Model no.- GS2107-WTBD
I Have Software- GT Designer3 GOT 2000
PLC- FX3G- 24M MELSEC
In hmi there are two ports RS232 Male & RS 422 Female
I connect that HMI via RS232
I have one female to Female connecting cable & male to USB cable.
Sir according to me the possibility of error female to female connector pin configuration or it can be cable problem i am not sure.
So if it is wrong then tell me about pin configuration of female to female connector.
when i configure the connection error arises that time error code is 01808502