Converting an analogue value to digital in RS Logix

Hi guys,
I want to measure the temperature of water and have that value read in a plc. I have all the hardware but I don't know what function to use or how to configure it in the plc to convert the analogue value to an actual meaningful temperature which could be read from a controller tag.

Any help would be appreciated on this.
Thank you.

Welcome to the forum!

Logix 500: use the SCP command
Logix/studio 5000: use the SCP AOI.

Please list the hardware.

If you don't care about accuracy that much, just use the value 50°C for water temp.