Peelce
Member
Hi guys,
i'm having trouble with a B&R Acopos 1022.
When i put the main voltage 3phase 405volts on , the red led is on and stays on. The driver won't go in run. I put the driver to another axis (XandY) of the same machine and the error is still on the same driver. Now the machine is running with a new driver and there are no more problems so cables and motors are all ok.
Can anyone tell me what could couse the error on the driver because i want to fix him as a spare part. I already took a view inside but can't find any part burned or whatever
Thx for helping me out
i'm having trouble with a B&R Acopos 1022.
When i put the main voltage 3phase 405volts on , the red led is on and stays on. The driver won't go in run. I put the driver to another axis (XandY) of the same machine and the error is still on the same driver. Now the machine is running with a new driver and there are no more problems so cables and motors are all ok.
Can anyone tell me what could couse the error on the driver because i want to fix him as a spare part. I already took a view inside but can't find any part burned or whatever
Thx for helping me out