Having difficulties remote connecting...I've googled and read the other threads here, but not getting a definitive answer.
Situation is VPN into a client's business network, which has a bridge to their plant network. The bridge is opened, and the ports for RSLinx are allowed. I can ping the remote IP address, but the ABETH driver doesn't see it (Yellow ? and Red X).
The default gateway on the CLX in question is correctly set, but what should the subnet be set to? As an example, my VPN IP address is 10.176.Z.X on the corporate side, and the PLC IP is 10.180.Y.X on the Plant side. I can ping and receive a reply the 10.180.Y.X address from the PLC, but when I put that IP into the ABETH driver, red X and Yellow ?
Currently the Subnet is set to 255.255.255.0 on the ENBT which I'm thinking restricts access to devices connecting with 10.180.Y. Shouldn't the subnet be 255.0.0.0?
Situation is VPN into a client's business network, which has a bridge to their plant network. The bridge is opened, and the ports for RSLinx are allowed. I can ping the remote IP address, but the ABETH driver doesn't see it (Yellow ? and Red X).
The default gateway on the CLX in question is correctly set, but what should the subnet be set to? As an example, my VPN IP address is 10.176.Z.X on the corporate side, and the PLC IP is 10.180.Y.X on the Plant side. I can ping and receive a reply the 10.180.Y.X address from the PLC, but when I put that IP into the ABETH driver, red X and Yellow ?
Currently the Subnet is set to 255.255.255.0 on the ENBT which I'm thinking restricts access to devices connecting with 10.180.Y. Shouldn't the subnet be 255.0.0.0?