OT: IP Rated DC Current Switch w/ Dry Contact

Snyd1

Member
Join Date
Jun 2018
Location
there
Posts
225
Off topic, but you people here usually have pretty good suggestions.

Title kind of says it, anyone know of a DC current switch that has a decent IP rating for outdoors and dry contact output does not require a power supply? Looking to monitor/log when power is lost on a 72VDC power supply.
 

Similar Topics

HI i have a delta VFD M-series in the manual, in order to enter the motor rated current you set the parameter P,52 =the motor rated current my...
Replies
7
Views
663
Replies
3
Views
2,179
My turn to post a non-plc related question. Believe it or not, it's drive related. Most drive manufacturers specify the overload capacity of...
Replies
4
Views
7,100
How do I get the mV or weight readings for individual load cells connected to summing board into the PLC? Do I use a MSG instruction and what are...
Replies
3
Views
656
Hi all, I have an IDC from Rockwell, and it is super old, but new (had it in the spares). The previous one has gone faulty, and I need to set...
Replies
6
Views
1,479
Back
Top Bottom