micky
Lifetime Supporting Member
I have a remote rack with a 1769-AENTR and a few 1769-IQ16. Every couple of days usually sometimes during the night the remote rack faults out the processor. Can't clear the processor fault unless I cycle the power on the remote rack. I've tried moving modules around to see if the problem follows a particular module but the module to fault is usually ether the 1st or 2nd module. This rack has 5 IQ16s in it. Any more info on what a (Code 16) error is?
Processor Fault:
Processor Fault:
I/O Module Fault:6/1/2015 7:18:06 PM
(Type 03) I/O Fault
(Code 16) I/O module connection failed on required module.
Port: Backplane
Module: $d7feb6c0$
Error: Connection timed out
Info: <none>
(Code 16#0010) Mode or state module does not allow object to perform requested service