I have a AB Panelview C600 and I am trying to connect it to a Micro 830 PLC. Im using the CCW to program everything and trying to follow the tutorials step by step. On the PLC I have the 2080-SERIALSOL module and it is wired to the C600 via RS485. I followed the tutorial to create the tags and all and then when I run the program and the HMI I am getting a data access error when I press the PV Push Button. If anyone could help explain to me how all this PV and CCW works a little I would greatly appreciate it! Also does anyone know if a 2080-OW4I is supported? I cant add this on the chassis in CCW
Thanks!
Dylan
Thanks!
Dylan