You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
 
Thread Tools Display Modes
Old November 24th, 2018, 04:39 PM   #16
phuz
Member
United States

phuz is offline
 
Join Date: Jun 2008
Location: Mohnton, PA
Posts: 788
Yeah, clearly we do it wrong.
  Reply With Quote
Old November 26th, 2018, 10:55 AM   #17
Firejo
Member
United States

Firejo is offline
 
Firejo's Avatar
 
Join Date: Jun 2008
Location: Redmond, WA
Posts: 1,042
Quote:
Originally Posted by rickhughes View Post
I have the same issue on 2 installs. 5069-IQ16 24vdc input at reference does not initiate the input. Re-routing of the wiring solved the issue. 5069-IF8 input properly shielded had to be re-routed not to induce a fault on the card.

I have discontinued using the 5069 i/o until AB solves the issue.

Rick
I'd be curious to see if Rockwell will consider it an issue or not. The 5069 series of I/O is very different than 1769 I/O in several ways including a lot more diagnostics capability (if I understand it correctly). Rockwell may view it as what would have gone unnoticed in the 1769 (induced noise for example) is visible in the 5069.
__________________
Go Hawks!!!
  Reply With Quote
Old January 11th, 2019, 09:59 AM   #18
phuz
Member
United States

phuz is offline
 
Join Date: Jun 2008
Location: Mohnton, PA
Posts: 788
FWIW, I wanted to share this about the 5069-OW16. I'm hearing more and more bad things and had another failure on a different project. The OW16 was used to power 120vac ice-cube relays, and it began to fault. The lack of internal snubbing is the issue with these modules, and Rockwell is well aware at this point. According to a tech note, they are being re-developed for May 2019. Until then, I would highly discourage anyone from using it for a 120vac application unless you plan on putting a snubber on each output.
  Reply With Quote
Old January 11th, 2019, 10:44 AM   #19
hugobear
Member
United States

hugobear is offline
 
Join Date: Aug 2015
Location: STP, MN
Posts: 8
Quote:
Originally Posted by phuz View Post
FWIW, I wanted to share this about the 5069-OW16. I'm hearing more and more bad things and had another failure on a different project. The OW16 was used to power 120vac ice-cube relays, and it began to fault. The lack of internal snubbing is the issue with these modules, and Rockwell is well aware at this point. According to a tech note, they are being re-developed for May 2019. Until then, I would highly discourage anyone from using it for a 120vac application unless you plan on putting a snubber on each output.
I'd add that you would need to do the same thing for 24vdc. Overall, I'd avoid this product line and stick to Point IO until they get their act together.
  Reply With Quote
Old January 11th, 2019, 11:01 AM   #20
phuz
Member
United States

phuz is offline
 
Join Date: Jun 2008
Location: Mohnton, PA
Posts: 788
Quote:
Originally Posted by hugobear View Post
I'd add that you would need to do the same thing for 24vdc. Overall, I'd avoid this product line and stick to Point IO until they get their act together.
I have not had this issue with 24vdc. But maybe I've been lucky.
  Reply With Quote
Old January 11th, 2019, 11:15 AM   #21
hugobear
Member
United States

hugobear is offline
 
Join Date: Aug 2015
Location: STP, MN
Posts: 8
Quote:
Originally Posted by phuz View Post
I have not had this issue with 24vdc. But maybe I've been lucky.
I did, and I wasn't. Also with absolutely no 120VAC in the panel at all. Still faulted out the rack until the card was removed. Rockwell took the card back and replaced it with an OB16. No problems since.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Point I/O vs Flex I/O Ih8Siemens LIVE PLC Questions And Answers 14 March 12th, 2018 07:01 AM
L35E repeated major fault rainagain LIVE PLC Questions And Answers 5 October 10th, 2017 06:59 AM
Compact I/O vs Point I/O ASF LIVE PLC Questions And Answers 13 September 29th, 2015 01:38 AM
Controllogix elledge LIVE PLC Questions And Answers 43 February 12th, 2014 03:55 AM
Point I/O fault Hydro Power Guy LIVE PLC Questions And Answers 0 August 22nd, 2012 08:41 AM


All times are GMT -5. The time now is 12:14 AM.


.