Omron Cj1m

Hello all, I have a machine misbehaving this morning. Unfortunately, I do not have access to the PLC. The PLC is an Omron CJ1M CPU11. The OEM has sent me what I think is the original program, but I need to get it printed to PDF. Anybody out there that can open and print to PDF for me.

Thanks in advance.

Glenn

Bump.

Anyone have CX-ONE software that can print this to PDF for me?

Thanks in advance,

Glenn

When I opened your program, there are quite a few sections showing error, it could be my version is not the latest. I am using CX Programmer Ver. 9.31. The following are some of the error, sorry

---------------- PLC: 'PLC' (PLC Model 'CJ1M CPU11' ) ----------------
Compiling...
[PLC/Program Name : PLC/Program]
[Ladder Section Name : Setup]
[Ladder Section Name : TouchPanel]
[Ladder Section Name : Recipe]
[Ladder Section Name : General]
WARNING: Rung exceeds the maximum size for online edit. (Extra: 75) - at rung 1 (0, 0)
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 10 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 7 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 2 ( 0, 5 ).
[Ladder Section Name : TopFeed]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 6 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 38 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 34 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 27 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 25 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 21 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 17 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 8 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 4 ( 0, 6 ).
[Ladder Section Name : Bottom1]
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 5 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 1 ( 0, 4 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 6 ( 0, 2 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 58 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 54 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 45 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 42 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 38 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 29 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 26 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 22 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 13 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 11 ).
ERROR: Operand 2 Invalid IEEE Floating Point format at rung 7 ( 0, 6 ).
[Ladder Section Name : Bottom2]

Glenn,

I have sent you a PM.

Mark

Mark,

For some reason the PM never came into my inbox, could you try again.

Thanks,

Glenn

part 1

Is this what you needed?
This is some of the sections. Had to post in 4 posts due to 5 files per post limit.
See attached files.

part 2

Here are some more files.

part 3

Here are some more files.

part 4

The rest of the files. Sorry for all the posts, maybe someone can combine the files and re-post.

This is great. Thank you so much.

Now I can at least see what was programmed.

Thanks again,

Glenn

Here is a screen shot of the file list so that you can view them in order.
See attached.