ShawnK
Member
I took this from the thread with all the panel pics posted. I originally was thinking of collecting enough info to start some sort of standard we all could follow or at least a minimum to exceed.
I think this may also be a good time to post links to CAD resources anyone has stumbled across or sought out intentionaly.
This was posted by AKREEL in the other post:
1. Use wire duct.
2. Use cable ties.
3. Label EVERYTHING.
4. Invest in a good carpenter's square.
5. Field terminals go on the outside edge of the panel, with plenty of finger space (2" or more) "outside" them.
6. Do a panel layout in CAD, and generate a bill of materials BEFORE you start building.
(7. Hire a good panel shop to do the work.)
Did I miss anything, Mr. Jenkins?
AK
I think this may also be a good time to post links to CAD resources anyone has stumbled across or sought out intentionaly.
This was posted by AKREEL in the other post:
1. Use wire duct.
2. Use cable ties.
3. Label EVERYTHING.
4. Invest in a good carpenter's square.
5. Field terminals go on the outside edge of the panel, with plenty of finger space (2" or more) "outside" them.
6. Do a panel layout in CAD, and generate a bill of materials BEFORE you start building.
(7. Hire a good panel shop to do the work.)
Did I miss anything, Mr. Jenkins?
AK