learner
Lifetime Supporting Member
Hi there,
I have configured the Rslogix5000 to get the I/O fault.
I need to pass this fault to DCS over Modbus using MVI 69 -MCM module.
The problem is that when this happened PLC executes the fault routin only.
Cank you tell me how to pass the I/O fault on to DCS?
Thanks
always learner
I have configured the Rslogix5000 to get the I/O fault.
I need to pass this fault to DCS over Modbus using MVI 69 -MCM module.
The problem is that when this happened PLC executes the fault routin only.
Cank you tell me how to pass the I/O fault on to DCS?
Thanks
always learner