Wizards,
I have an issue related to vibrations.
I had some equipment fail and prior to it failing it started to vibrate real bad, within a week or so the equipment was unusable.
When it was sent off for inspection, the inspection department tells me the equipment I sent them does not shake at all and the vibration is from my equipment.
Rather than trying to pull teeth via emails, I was looking at some options.
An inexpensive option would be for me to pick up a board from amazon and use one of my RPI.
guide I found:
https://www.raspberrypistarterkits.com/guide/raspberry-pi-accelerometer-gyroscope/
Has anyone tried one of these builds?
If so, was it reliable enough to gather useful data?
I'm not looking for precise values, just something I can mount to the line and validate my equipment only has vibration that are caused by their equipment.
Gad
I have an issue related to vibrations.
I had some equipment fail and prior to it failing it started to vibrate real bad, within a week or so the equipment was unusable.
When it was sent off for inspection, the inspection department tells me the equipment I sent them does not shake at all and the vibration is from my equipment.
Rather than trying to pull teeth via emails, I was looking at some options.
An inexpensive option would be for me to pick up a board from amazon and use one of my RPI.
guide I found:
https://www.raspberrypistarterkits.com/guide/raspberry-pi-accelerometer-gyroscope/
Has anyone tried one of these builds?
If so, was it reliable enough to gather useful data?
I'm not looking for precise values, just something I can mount to the line and validate my equipment only has vibration that are caused by their equipment.
Gad