Print direct to Zebra S4M from Red Lion G3 or DSP

CAD Services LLC

Lifetime Supporting Member
C
Join Date
Mar 2021
Location
Spartanburg SC
Posts
10
Greetings,
I would like to print just five lines of data to a Zebra S4M printer.
I would like to use the Ethernet Post but open to suggestions.
I have done RAW Ethernet IP using the G3 touch screen to Score Boards, but have little experience with ZPL programing.
I will be using a Red Lion G3 or a Red Lion Data Station Plus to send the Print commands.
Note: We have a $500 budget for any ZPL programing help.
 

Similar Topics

C
Print direct to Zebra S4M from Red Lion G3 or DSP
Greetings, I would like to print just five lines of data to a Zebra S4M printer. I would like to use the Ethernet Port, but open to suggestions...
Replies
0
Views
1,551
CAD Services LLC
C
N
RSLogix 500 print out
Will someone please convert this logic to pdf?
Replies
2
Views
127
NetNathan
N
C
Melsec Medoc - program print
Anyone have access to Melsec Medoc plus 2.31a that can either open a file (.pcd zipped in link below) and send a PDF/screenshot of the ladder, or...
Replies
10
Views
381
parky
P
V
Markem NGPCL Print Count
I am working on a Markem X40 printer which uses NGPCL Commands and needs to send commands using a .net program. I need help with the following...
Replies
1
Views
133
valer85
V
G
Studio 5000 print to pdf = Fatal Error
Hello, this is my first post after being a long time creeper on this forum. I am experiencing a fatal error any time I attempt to print to PDF...
Replies
2
Views
387
Grish
G
Back
Top Bottom