Modbus Conversion Module

skanani

Member
Join Date
Dec 2003
Location
Iran,Mashad
Posts
3
Hi,
I have a PLC that I don't know the pattern of data on it's serial bus.
It sends it's data on RS232.
Is there any module available to convert the data of PLC to Modbus?
Thanks
 
skanani said:
I have a PLC that I don't know the pattern of data on it's serial bus.

Do you at least know the brand? There's more than one brand of PLC (actually, there's more than two!), so that would be helpful information to provide.

beerchug

-Eric
 

Similar Topics

Hi, Im doing a project with a Power meter that offers Modbus TCP and each signal is a 32bit Float.¨ I tested the float in Modbus Poll and...
Replies
22
Views
2,949
Hi Guys, Maybe you have some experience with this set-up and can give me some pointers. Project is to use an Emerson DCS to communicate (via...
Replies
3
Views
2,015
I have an existing Micrologix 1400(B) which is being addressed from an HMI via a PCCC/DF1 driver. However in moving to a new HMI I want to use a...
Replies
6
Views
2,025
Hi gents, i'd like to know what are the guidelines for converting a Micrologix 1100 program to a Contrologix in term of modbus communication...
Replies
15
Views
10,703
I am working on a Scada project where the device (a Hydrocarbon Detecting equipment) have a RS-232 port for serial interface. But you can only...
Replies
2
Views
1,671
Back
Top Bottom