Siemens s7 312c connection to PC

Finn Gevind

Member
Join Date
Apr 2012
Location
Rudkoebing
Posts
3
Hello
I have a Siemens s7 312C PLC and a IBM PC with Simatic S7 V. 5,4 Sp 3 installed.
I have got a USB / MPI cable from China. But it does´nt work, ( some could think, that was a bad idea to buy overthere, but it was cheap ). I have set the PLC PG/PC interface correctly and i have load the drivers to the cable to my PC. I have also load the Siemens USB driver to my PC.

Are there anybody, there have idea´s to what my problem could be.

I hope you can understand my english, I am from Denmark.

Sencerely regard Finn
 
Finn,

All the knockoff cables I have seen should be set to a COM port. Check in the Windows Device Manager to see if the cable is using a COM port.
 

Similar Topics

Hi! I have a question regarding ethernet communication with a Siemens S7-312C and 343-1 Lean. For some time I´ve been using the S7NetPlus...
Replies
8
Views
3,297
A client asked me to modify an existing system. It is a Siemens S7-312C compact CPU and a OP3 text display. Now the bitmemory MB0 to MB 60 is used...
Replies
3
Views
2,420
Hi everyone hope you'll well. Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
Replies
3
Views
25
I have established an online connection to a machine using an S314 processor. I am using an mpi connector and simatic manager. The online...
Replies
3
Views
71
Hi everyone, i have a Siemens S7-300 Cpu 314C-2 DP with several cards of i/o and servos my laptop has TIA version 16 and 17 loaded and...
Replies
4
Views
134
Back
Top Bottom