janner_10
Lifetime Supporting Member
I have inherited a stinker of a job sadly.
Customer has a Siemens TI-555 CPU on a Uniloy Blow Molder.
I need to get online and interrogate some data to retro fit a servo drive for the swing arm.
We have the project so what are there any gotchas to going online?
Dip switch positions has Port 1 set up a programming port, what about cables?
Would a null modem via a usb / serial converter do the job?
Customer has a Siemens TI-555 CPU on a Uniloy Blow Molder.
I need to get online and interrogate some data to retro fit a servo drive for the swing arm.
We have the project so what are there any gotchas to going online?
Dip switch positions has Port 1 set up a programming port, what about cables?
Would a null modem via a usb / serial converter do the job?