the_msp
Lifetime Supporting Member
Referring to the PLC? I just programmed straight in LL. I don't have as much IO as you. For ST there is an app.
RSStudio 5000 as House-control
- Thread starter Uffe Henneberg
- Start date
Uffe Henneberg
Member
OP
Yes the PLC, I have done it in plain Ladder to. But it takes 4 lines to make a KIP relay. And with the new CPU I have the oppotunity to do it nicer,
the_msp
Lifetime Supporting Member
You can take advantage of AOIs and UDTs in 5000 compared to the SLC.
Uffe Henneberg
Member
OP
Yes exactly, I will use an AOI.
But if someone allready have made one, I could use or modify that.
Otherwise I will make one myself.
But that is what I am looking for
But if someone allready have made one, I could use or modify that.
Otherwise I will make one myself.
But that is what I am looking for
Similar Topics
Attempted to import a module L5X to a project. The previous module occupying that Module name and IP Address has been deleted.
Where would this...
How can I import my tags in 5000 into Studio? I see how to export them to a CSV, but studio wont read a CSV....help please???
I'm working on getting some alarms on a panelview plus 1000 on our production line from a plc controlling the hydraulic pumps for this line. All...
About 2 years ago, I upgraded 6 workstations to Rockwell Rev 26.0. This included all the RsLinx, and RsNetworx, and rsView revisions that were...
Hi Everyone. Not posted on here for a long time, but I am hoping someone can help me.
I am doing a differential pressure calculation in a L27ERM...
