I need help with Omron PLC CJ Series

Hi, I don't have any formal education background with PLC. I am learning PLC by myself. I have CJ2M CPU34 unit and CJ1W-DA021 unit. I would appreciate if I could get some simple example for Analog output in CX-Programmer. I desperately need help!!!!!

It's pretty straight forward in Omron. The Analog module is addressed by to switches which in turn determine the memory area.
So if the module is address 0 then the memory area is CIO 2000 - 2009 with 2001 being the 1st output word. You just use a MOV(021) instruction to Move data from a memory word to the output. There are examples in the manual
https://industrial.omron.ca/en/media/W345-E1-11_CS-CJ-Series_OperManual_tcm824-112878.pdf