PanelView 900 to Micrologix 1200

Join Date
Jan 2007
Location
Humacao
Posts
15
I'm trying to communicate a PV 900 to a Micrologix 1200 but it does not happens anything.
I don't have any kind of problem downloading the program from PanelBuilder32 to the PV900 and also RSLinxs recognizes the PV900.
But the PV900 does not establish communication with the Micrologix using RSLogix or connecting it directly with the Micrologix 1200.
I need help!

 
alfred_fuentes said:
I'm trying to communicate a PV 900 to a Micrologix 1200 but it does not happens anything.
I don't have any kind of problem downloading the program from PanelBuilder32 to the PV900 and also RSLinxs recognizes the PV900.
But the PV900 does not establish communication with the Micrologix using RSLogix or connecting it directly with the Micrologix 1200.
I need help!


Please post the exact PV part number and cable, firmware level, and PB32 s/w level you are using.
 
PV900 part number 2711K9CB SERIES C FRM 4.20
PB32 VERSION 3.82
The cable that we are using to conect the PV to the Micrologix is 1761-CBL-PM02.

The cable that we are using to connect the PV to the PC is a pin to pin cable.
 
alfred_fuentes said:
PV900 part number 2711K9CB SERIES C FRM 4.20
PB32 VERSION 3.82
The cable that we are using to conect the PV to the Micrologix is 1761-CBL-PM02.

The cable that we are using to connect the PV to the PC is a pin to pin cable.

The Panelview you are using (K9C8) has a DH+ interface and that is not compatible with the Micrologix 1200. You need the K9C16 version (DF1).
 

Similar Topics

Hi, I'm trying to figure out how to properly update the "icons" on my Panelview 900 (AB 2711-T9C9). I think maybe I'm having a fundamental...
Replies
13
Views
950
Panelview 900 communicates with SLC 5/03 PLC. When I upload the program from the panel, some buttons have the address B3/306, B3/304 etc. However...
Replies
9
Views
2,428
Panelview Part #: 2711-K9A8, that communicates via DH+ to a SLC504. There are two PV's on the network. One has lost its application. Downloaded...
Replies
3
Views
1,939
A question for the hive mind, i have a Panelview 900, monochrome non touchscreen model. On power up, i get error 34 which relates to an extended...
Replies
5
Views
2,138
I have those old early 90's panel views in my plant. I use an old XP image to get the program back into them but maintenance wanted a way to do it...
Replies
3
Views
2,371
Back
Top Bottom