annerobed
Member
HELLO BOYS, I HAVE AN INTERROGANT, HOW CAN I MIGRATE A PROGRAM FROM A PLC MICROLOGIX 1500 TO A PLC 1400:beerchug:
Migration PLC MLX 1500 TO MLX1400
- Thread starter annerobed
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
You should be able to just change the processor type in the program and match the wiring depending if you have any io added
Similar Topics
I recently came into "ownership" of a system comprised of multiple SLC5/05 processors. Of course the fun no prints adventure exists as well as a...
Best way to convert a PLC-5 .RSP file to a Logix5000 .ACD file? Seems AB has quit supporting the project migrator application and you have to go...
I am currently doing a PLC-5 to ControlLogix migration. I have the old program in Studio5000. Overall, it looks good. However, I have a few PCE...
Dear Automation guys,
Im quite new to Rockwell. I have to do the migration of logic from PLC-5/40 to CLX L71 CPU.
So far:
- I have done exports...
Hi All
I have an issue with the PV800 (C800) panelview. I had to upload the C600 program first. Then using CCW, i created the new program.
I...