SICK cable pinout 6021195

bugnot

Member
B
Join Date
Feb 2016
Location
everywhere
Posts
4
Hi, I know this is not a PLC issue, sorry. I have a Sick Safety Laser Scanner and I wanna get connected to check some issues on it.

I do not have the DB9 to M8 4pin cable, somebody has the pinout so I can built the cable by myself? I would really appreciate it!

Thanks

Regards
 

Similar Topics

rootboy
Sick lightscreen programming cable
Hi guys, We have SICK C4000 lightscreens here and are in need of a programming cable for it. The part number is: SICK 2027649 Does anyone...
Replies
4
Views
2,122
Passman
P
R
OT looking for a cable for a SICK barcode reader
Hey guys, Attached is a picture of an 11 pin cable we pulled from a SICK barcode reader. The cable is damaged and needs to be replaced, but when...
Replies
4
Views
3,074
hadji likes plc
hadji likes plc
L
SICK light barrier pc cable
Apologies as not exactly PLC but im sure enough of you out there have programmed these units.Has anyone got a pinout(schematic) of the pc...
Replies
8
Views
7,418
slick5
S
L
Question about SICK Safety Laser-scanner for robot arm
Hi I have a yaskawa gp7 robot arm which I am going to use for machine tending with a cnc mill. Is it a good idea to buy a SICK laser scanner for...
Replies
5
Views
226
bill4807
B
D
SICK AFM60a Saving Parameters to Non-Volatile Memory
Hi all, I have installed a SICK AFM60A-S4IB018x12 encoder to Allen-Bradley CompactLogix PLC and configured its parameters via AOI provided by...
Replies
0
Views
90
dirty_magic
D
Back
Top Bottom