read msg and configuration

man64

Member
M
Join Date
May 2017
Location
santodomingo
Posts
4
I am starting with plc micro logix 1100 and I could not establish communication with via message with a meter the communication of the equipment is via dh-485 with plc and I with plc via ethernet
i want to read a meter shark 1100
please help me
thank
 

Similar Topics

J
RSlinx Error Msg. "unable to read module's port configuration"
Hi All Whenever i try to change the IP address of a compact logix PLC from RSlinx, this message appears to me "unable to read module's port...
Replies
6
Views
4,398
preacher.ca
preacher.ca
timryder
CompactLogix MSG Read from Proface?
Does anyone know if is possible to read data out of a ProfaceHMI/PLC into a CompactLogix PLC? I have a bunch of OEM machines on our plant floor...
Replies
2
Views
492
timryder
timryder
celichi
CompactLogix CIP MSG Read via NAT 1:1
Hello Everyone, Can two PLCs on two different subnets pass data via CIP MSG Read Instructions? I would be using the HMS Fl3xy NAT 1:1 feature to...
Replies
6
Views
2,468
celichi
celichi
A
MSG read from Micrologix ENI to SLC5/05
So I have a micrologix 1500 on network through an ENI. I need to read an integer from it to my SLC5/05 so I can stop pumps when the remote tank is...
Replies
7
Views
2,031
ArcReactorKC
A
H
Compactlogix MSG read PLC5 via ethernet. Can't cache connection?
Yesterday I was working with an Allen-Bradley Controllogix and a Compactlogix. I was using a MSG instruction to read from the Controllogix via...
Replies
0
Views
1,126
hardaysknight
H
Back
Top Bottom