You should to chose model Micrologix series for the software ''Rslogix 500.''
Thanks, but no, that's not the problem.
You should to chose model Micrologix series for the software ''Rslogix 500.''
Never been it's work before? If that, then you should remember the installation process. Rslogix 500 all over allen bradley PLC software doesn't work, if it is not install properly by select the programming region or language or others.Thanks, but no, that's not the problem.
Never been it's work before? If that, then you should remember the installation process. Rslogix 500 all over allen bradley PLC software doesn't work, if it is not install properly by select the programming region or language or others.
Wish your best luck bro...and thanks for all.Thank You, But No, that's not the problem either.
I will fill in proper information when I discover what the real problem is, and I do have a good idea what it is.
Well, it's been narrowed down, so I will see what this coming week brings.
Wish Me Luck!
I said as much in post 27.What a convoluted mess!
Just a WAG... but Windows update maybe?
So just another WAG... if it stops working again, check for Windows updates and remove them then try it again, should be a lot easier and faster than what you went through, you can see the install dates and just pick them off one at a time until you go back far enough
After I get back from the beer store...
Now your talking.... it's beer:35 anyway (AKA 12:35)