Wincc Flex Tag change during Runtime
- Thread starter cotang
- Start date
Maybe
You can have a multiplexed tag. Where you have an index variable that will move the tag up and down a DB. So you could move a tag from DB1.DBW0 to DB1.DBW2 I don't know if you could go between different DB's.
You can find an example here
http://www.plctalk.net/qanda/showthread.php?t=40785
You can have a multiplexed tag. Where you have an index variable that will move the tag up and down a DB. So you could move a tag from DB1.DBW0 to DB1.DBW2 I don't know if you could go between different DB's.
You can find an example here
http://www.plctalk.net/qanda/showthread.php?t=40785
Similar Topics
Hi All,
I have some WinCC flex templates that I need to duplicate in the same project but for a different connection (PLC). I cannot find any...
I am a little confused by a program that I am looking at.
So If I got this correct multiplexing is using indirect addressing (Which points to an...
In Flex sp2 in faceplate editor, I want to make a button visible when a external tag from plc (mw100) has value 4.
In the designer, I can only...
Hi
I have approx 2000 tags I need to use in a mutiplex method. I exported the tag list to csv but the mutiplex tag has no multiplex data...
I'm programming an MP370 (for the first time) and using WinCC Flex 2008 advanced. Please excuse my ignorance because I'm used to AB PanelView +...