Hello,
I'm wondering if its possible to set up some logic, and eventually a HMI button to reset a Festo Valve Stack module after startup.
I have a system where 3 valve stacks' Ethernet connections are daisy chained together, and during start up the stacks later in the chain often don't come online correctly. This is easily fixed by going to the hardware properties inside RSLogix5000, under the Module Info tab and pressing "Reset Module."
I'm really hoping there's a simple way to accomplish this same thing, from the HMI...
Thanks in advance for your help!
R/
Andrew
I'm wondering if its possible to set up some logic, and eventually a HMI button to reset a Festo Valve Stack module after startup.
I have a system where 3 valve stacks' Ethernet connections are daisy chained together, and during start up the stacks later in the chain often don't come online correctly. This is easily fixed by going to the hardware properties inside RSLogix5000, under the Module Info tab and pressing "Reset Module."
I'm really hoping there's a simple way to accomplish this same thing, from the HMI...
Thanks in advance for your help!
R/
Andrew