AB and ABB: Running ABB IO with AB processors

xetrov123

Member
Join Date
Mar 2008
Location
Tacoma, WA
Posts
25
Does any one out there have experience integrating ABB 800xa IO with AB controllers? We have a large base of profibus ABB IO that would be connecting to several AB processors. I am curious how much manual entry would be required since we wouldn't be able to use ABB's engineering tools.

I'd appreciate any feedback!

Chris
 

Similar Topics

Hey there, We have Multiple sewer lift stations using these drives. My boss would like to know what percent the pumps are set to run at...
Replies
7
Views
2,682
I have an ACS 600 drive for motor control. The drive receives a 4-20mA input from a PLC at terminal AI2. The 4-20mA signal changes but the Motor...
Replies
2
Views
1,516
Hello all, I have an ABB PLC (PM573) and it has without MC card. I need to take backup from PLC to PC (in automation builder v2.7 ). My...
Replies
8
Views
169
Folks, I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Replies
0
Views
65
Hi everyone How i can configure a periodic report of the list of alarms? Thanks
Replies
0
Views
57
Back
Top Bottom