use bit as alarm trigger

shishi

Member
S
Join Date
Jun 2017
Location
italy
Posts
9
hello forum
i need to use bits of integer and long data type for trig alarms with opc driver in ifix. i saw that with digital Alarm(DA) i can specify the bit with ";;/bit" after i/o path but i need also something that allow me to use 32 bits,but i do not know what can i use.
 

Similar Topics

H
FactoryTalk View Alarm Trigger Value = Bit LVL in Logic
Since you can't have a trigger value=0 in the alarm setup, you need to start with 1 but in my logic/FTV my xxxxx[0].0 = trigger value 1. How...
Replies
13
Views
7,559
AMarks95
A
U
HMI Alarm in S7 Portal... showing the trigger bit ?
Hi, In an Alarmview there is the Alarmtext. But our customer wants to show the triggerbits of the alarms in the Alarmview. There are 350 Alarms...
Replies
2
Views
2,180
userxyz
U
ELake20
WinCC Flexible Alarm trigger bit number calculator
Since Siemens is big endian, is there a quick and easy way to determine the trigger bit for discrete alarms? I'm looking to implement something...
Replies
2
Views
5,076
ELake20
ELake20
O
FactoryTalk View ME Bit-Array Alarm Trigger w/ DeviceNet
I'm having an issue setting up the alarm trigger for a PanelView Plus 1500 connected to a PLC-5 via DeviceNet. Other indicators, etc. seem to be...
Replies
0
Views
6,244
ogimoj
O
C
RSLogix5000 Alarm summary bit for annunciation
I've got a plant with around 500 different instruction-based alarms. The plant would like for the sirens and beacons to go off when any one of the...
Replies
14
Views
2,499
OldChemEng
O
Back
Top Bottom