Redundant server for Allen Bradly

Ali Raza

Member
A
Join Date
Oct 2016
Location
Lahore
Posts
16
hi every one i m designing one redundant topology for Allen Bradly
we required 2 redundant server and one operator station
i have selected
9701-VWSB100AENE FactoryTalk View SE Station 100 Display (02)
does i still need to some one other software for operator station are above selected system will behave also as a operator
after that redundant server how communicate with redundant cpus
 

Similar Topics

L
FTV SE redundant server help needed
I think I’ve exactly followed the FTV SE guide for setting up a redundant server PC, but I’ve ran into this issue and haven’t been able to figure...
Replies
5
Views
1,239
Nova5
N
L
Factorytalk view SE server redundant license
I've found snippets on Rockwell's site about FTV 12.0 offering a redundant server license at a reduced cost, but my local AB rep knew nothing...
Replies
2
Views
3,064
janner_10
J
M
FTView Network Distributed station with redundant server
Hello Experts, I have a system with network distributed redundant server with 5 clients and an engineering laptop. Can any one please describe...
Replies
1
Views
2,071
janner_10
J
C
Wincc 7.4 Redundant server configuration
dear all, i'have set redundant server Wincc SCADA configuration with 4 client applications. redundancy is enabled and is working properly...
Replies
0
Views
1,476
chapani
C
B
PLC Redundant IO Server for HMI Nodes
Hello Team, Please I need your help on these! I have a set up with two redundant PLC. There is a primary and secondary server I.e redundant...
Replies
3
Views
6,061
bit3399
B
Back
Top Bottom