Thinking about ordering this insulated screwdriver
Last edited:
looking for a screwdriver
- Thread starter ganutenator
- Start date
Bering C Sparky
Lifetime Supporting Member
LOL....Opened an overboard pump starter last week and found a just such a bit sticking off the screw on the overload......"I wondered where that went".
(Probably been there for 3 or 4 months)Got new boots on, so no insulated needle nose were necessary.
BCS
Bering C Sparky
Lifetime Supporting Member
My bit came out of this screwdriver though, they are Stainless Steel and hold up much better in this salt water environment.
https://www.amazon.com/Megapro-151SS-Stainless-Driver-Yellow/dp/B004VJY99Y
https://www.amazon.com/Megapro-151SS-Stainless-Driver-Yellow/dp/B004VJY99Y
Hi,
This range might help with those pesky IEC contactors! It has a straight edge built into the pozi style head...
http://www.poolandspapartsnow.com/c-k-tools-screwdriver-term-insulated-sz1-49045-1/
There are several different bit sizes to cover most of the screw types out there.
Regards,
Rob
This range might help with those pesky IEC contactors! It has a straight edge built into the pozi style head...
http://www.poolandspapartsnow.com/c-k-tools-screwdriver-term-insulated-sz1-49045-1/
There are several different bit sizes to cover most of the screw types out there.
Regards,
Rob
geniusintraining
Lifetime Supporting Member + Moderator
I also sell Wera https://www.plccable.com/brands/Wera-Tools.html
I dont think you can beat the Diamond tips, they are by far the best and have been using Wera for about 10 years and will continue to use them as long as they are around
Could not agree more. Wera make excellent screwdrivers. I particularly like their "Reduced blade diameter" screwdrivers. Sure they're a little weaker but they fit absolutely anywhere.
http://products.wera.de/en/screwdrivers_kraftform_plus__series_100_vde.html
danw
Lifetime Supporting Member
Does Wera make a #2 or #1 pozi drive bit? I did not see one.
Yes, on their site they sell the PH 1 and PH2 on their own or in sets:
Normal blade diameter
Reduced blade diameter
Stainless steel normal blade diameter
Im not sure if PLC Cable sells them.
geniusintraining
Lifetime Supporting Member + Moderator
No we dont, like 99% of my other items I sell... we only sell what we use
We use cordless screwdrivers most of the time building trainers and cabinets and use the inserts in them but when going on troubleshooting calls Wera are in the tool buckets, they dont wear out or break, they just work
Automation Direct has good prices on them https://www.automationdirect.com/ad...ery=wera&categoryId=5262&TxnNumber=-1&start=0
Similar Topics
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
I have Allen Bradley plcs, I have had Circuit breakers and other automation equipment in the past.
There's no solid buyers local.
How much do you...
can anyone has a good program to learn plc programming online. i have the basic looking into improve my skills
thanks
I want to monitor a couple signals in a place where there is no PLC but there is ethernet. I know I can use an AENTR or Flex I/O and a module but...
I downloaded v24 for studio 5000 but can’t find where the download manager put it! Any help? I’ve done it before but can’t remember. Thanks