SLC 500 Pressure test

I changed the graph colors to make it easier to see.

https://youtu.be/cER96UcZQGw

https://youtu.be/So6EQpi3x5o

chopperprop said:

I changed the graph colors to make it easier to see.

https://youtu.be/cER96UcZQGw

https://youtu.be/So6EQpi3x5o

Click to expand...

Ok so the bottom station is the only device used as far as getting a measurement the green represents the on time to look at the pressure in run speed- the white is the on time to look at the pressure during jog speed and is ignored once the machine is up to speed which takes about 3-6 seconds.
The top yellow is the pressure reading and the bottom is the encoder time.
The problem is that when sending a seal through the line at fast speed it only fails 80 percent of the time 8 times out of 10 or less - however in jog speed at 20 ppm or less than 100 ppm- it correctly fails the test part 100 percent of the time.

chopperprop,

i'm sorry but my firewall won't let me see your videos.

james

James Mcquade said:

chopperprop,

i'm sorry but my firewall won't let me see your videos.

james

Click to expand...

Sorry to hear that i do not see a way to post them here