Donniek
Lifetime Supporting Member
We have a Xycom 2005 and it wont get past the boot page. Any Ideas?
Zycom 2005
- Thread starter Donniek
- Start date
sigmadelta
Member
All I can say is if you don't have a backup of the application, get one somehow, and convert it to a more modern HMI!
Link to manual.
Replace backup battery.
Try going into setup mode. F10 twice, or PG DN and 9 simultaneously. See PDF page 43 here.
Diagnostics start on page 57.
Replace backup battery.
Try going into setup mode. F10 twice, or PG DN and 9 simultaneously. See PDF page 43 here.
Diagnostics start on page 57.
Similar Topics
Hi,
My clients have this 16 year old, but quite good machine with B&R IPC5000, PLC 2005, ACOPOS1022 servos and some Lenze 8200 VFDs.
Due to...
I have a B&R 2005 plc and it looks like it uses automation studio version 4
i am try just get the program off of it so can change it to an allen...
I'm continuing my Siemens education. I need some help with compatibility details.
My customer has a machine that was made by a company no longer...
I've been instructed to suck the program out of one plc and install it in another of the same model for the same process. This is my first...
Below are the few details for your reference:
B&R PLC Module 2005
CPU – CP152 with APM (Application Memory) Module ME
Power Supply – PS477...