Reading RSLinx or VBP diagnostics via CIP MSG from RSEmulate

Nomographer

Lifetime Supporting Member
N
Join Date
Jun 2013
Location
Texas
Posts
15
I use RSEmulate V20 and RSLinx Classic Gateway to interact with a simulator and an HMI. Sometimes, a system will become less stable and responsive if left running for days at a time. I currently troubleshoot from RSLinx by reading the Communication Events log and examining the screens for CIP Diagnostics and Driver Diagnostics.

Is there a way to have a MSG instruction read any of this information? It would be nice to put this data into points that I could then read via OPC.
 

Similar Topics

P
Wonderware Historian not reading from remote WWRSLINX
I configured a Historian that has 22 data sources (all remote Wonderware nodes). Some are DASABCIP, most are DASMBSerial, and one is WWRSLINX...
Replies
0
Views
1,999
phuz
P
C
RSLinx OPC to OSI PI - Reading Data Options
Currently, we are using RSLinx OEM for an OPC server and connecting to an L35 CompactLogix. I am reading correct data for some tags in the...
Replies
2
Views
5,079
dmargineau
D
BAJ
iFix - Reading an array of Reals from ControlLogix via RSLinx OPC Server
Can anyone tell me the proper I/O address format to use for doing this? I've done this a million times with Modicon, but that driver doesn't...
Replies
1
Views
5,486
randheerp
R
B
Reading registers in AB PLC without RSlinx
Hello All, I am trying to find a way to receive information from a PLC without using RSlinx. If I am talking serially, can I write an...
Replies
6
Views
5,754
Archie
A
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
88
bkottaras
B
Back
Top Bottom