Ones_Zeros
Member
Hello
I have a PLC test program that has a rung of logix in the "MainRoutine"
Its a simple rung that closes relay and makes the bit true and starts a timer.
I have 3 seperate programs labeled
Run1
Run2
Run3
In each of these seperate programs (Run1,Run2,Run3) I have a Memory bit tag with the same label called "Prestart"
I would like to close the relay located in the "Mainroutine" if any of the "Prestart" bits are true in programs (Run1,Run2,Run3)
Since these tags are labeled the same, how would I program these 3 tags
called "prestart" to close this relay and start the timer?
thanks
I have a PLC test program that has a rung of logix in the "MainRoutine"
Its a simple rung that closes relay and makes the bit true and starts a timer.
I have 3 seperate programs labeled
Run1
Run2
Run3
In each of these seperate programs (Run1,Run2,Run3) I have a Memory bit tag with the same label called "Prestart"
I would like to close the relay located in the "Mainroutine" if any of the "Prestart" bits are true in programs (Run1,Run2,Run3)
Since these tags are labeled the same, how would I program these 3 tags
called "prestart" to close this relay and start the timer?
thanks