I want to convert program written in stl to ladder.Sometimes it is failing as the programmer do not write nop statement in code.İs there a program ( freeware preferably ) that convert stl to ladder.
I search google for this conversation issue, only thing that ı grasp is to add NOP for every terminal that is not used at ladder, for example
we have an up counter which have ladder representatiın at attached figure
ladder do not have any connection at 5 port , so we should have 5 nop ,
A I 0.5
CU C 1
BLD 101
NOP 0
NOP 0
NOP 0
NOP 0
NOP 0
A C 1
= Q 4.6
Are there any other rules for converting STL to Ladder.İf anyone have systematic information, can you help me ?
Thanks
Cagrı
I search google for this conversation issue, only thing that ı grasp is to add NOP for every terminal that is not used at ladder, for example
we have an up counter which have ladder representatiın at attached figure
ladder do not have any connection at 5 port , so we should have 5 nop ,
A I 0.5
CU C 1
BLD 101
NOP 0
NOP 0
NOP 0
NOP 0
NOP 0
A C 1
= Q 4.6
Are there any other rules for converting STL to Ladder.İf anyone have systematic information, can you help me ?
Thanks
Cagrı