Add a CPU to the library tia portal

If your TIA supports the model you are wanting to add, you can install the HSP support packages. Or use the update tool.


Some of the newer CPU's are not supported by the older software. And as mentioned, some are restricted by what license you have.

Capture.PNG
 

Similar Topics

Hello The plant is running and there is no shutdown nowadays therefore I can add 1734- AENTR and its card while PLC is in Run? I do not wanna...
Replies
1
Views
113
Hi Guys. I got a 1212C DC/DC/DC with 4 PWM outputs. I thought by adding an SB1222 atop of the CPU would give me more PWM outputs... but...
Replies
3
Views
2,138
Hi all is their any way to add CPU 317-2DP into catalog of simatic5.1. Thanks
Replies
2
Views
1,720
I have ordered a new CPU for a new project. It is not covered in my Step7 (V5.3 SP1). I understand I can download an update for my hardware...
Replies
9
Views
6,954
Im trying to create a level indicator for water Tank i have used the ADD function while the pump is on and level increasing everything works...
Replies
12
Views
76
Back
Top Bottom